TPE Sex Doll Accessories – Repair Kit

Sex Doll Accessories Repair Kit Guide for Silicone and TPE Products

This guide provides detailed instructions for repairing and maintaining silicone and TPE including fixing damages, adhering to nails, addressing gel breasts or buttock deformations, removing stains, and using proper cleaning techniques. It also includes specialized tools such as repair glue, AB gel, cleaning oil, syringes, and cotton swabs, along with essential safety tips and recommendations for optimal results.

Repair Glue – Silicone 30ml

Clean the damaged area thoroughly, ensuring it is free of debris.

Use an appropriate tool or a cotton swab to apply glue to the damaged spot.

Carefully wipe away excess glue from the surface, not disturbing the applied glue layer.

Let it sit for 6–8 hours, then check if the damage has been repaired.

Repair Glue – TPE 30ml

1. Carefully clean the damaged area.
2. Apply glue evenly and appropriately using a tool or cotton swab.
3. Gently wipe off any excess glue on the surface
4. Allow it to sit for at least 30 minutes before inspecting the repaired area

Nail Glue – For Silicone and TPE 10ml

1. Clean the area where the nail will be applied, ensuring it is clean and dry.
2. Remove the cap from the nail glue.
3. Carefully apply glue to the nail application area, ensuring moderate glue usage.
4. Attach the nail and press lightly for 30 seconds.

Note: Avoid excessive pressure on the nail and fingers to prevent tension between the nail and the silicone, which may cause detachment.

Check if the nail is firmly adhered.

AB Gel – For Gel Breasts or Buttocks Deformation 100ml

Prepare an empty cup, cleaning oil, and a syringe set.

Note: The needle is very sharp; handle it carefully to avoid injury.
Pinch the nipple with your fingers and slowly insert the needle deep into the nipple.

After insertion, gently use the needle to separate the gel section from the skin to create a cavity, ensuring a smooth injection process.

Repeat steps 2 and 3 to create a cavity in the other breast.

Firmly connect the syringe needle to the tube to prevent detachment.

Use a cup to thoroughly mix Gel A and Gel B in a 1:1 ratio.

Note: The gel must be stirred evenly and injected promptly after mixing, as it will solidify quickly.

Fill the syringe with the mixed gel, connect it to the needle using the tube, and begin the injection, holding the connection firmly.

Note: Adjust the needle position during the injection to ensure even gel distribution.

After the injection, remove the needle and clean the syringe parts with cleaning oil to prevent clogging

Stain Remover 15g

Use cleaning oil to clean the stained area thoroughly.

Evenly apply the stain remover to the stained area.

Let it sit for 8 hours, during which most stains will be removed.

Clean the surface again with cleaning oil.

Note: The effectiveness of the stain remover may vary depending on the type of stain. Multiple applications may be required based on the actual situation.

Cleaning Oil 100ml

Can be applied directly to stains for wiping clean, or a cleaning cloth soaked in cleaning oil can be used to wipe the stains.
Note: Keep the bottle sealed to prevent the cleaning oil from evaporating.

Other Accessories

Syringe Set
Cotton Swabs
Cleaning Cloth
Repair Kit Instructions